KSW STUD WELDING MACHINE - SINGLE TORCH
SINGLE TORCH WELDER
Advantages:
Soft-switching inverter technology, small size, light weight, energy saving and environment friendly.
Modular Design, Full range of protection and use of pure IGBT devices, machine safety and reliability, low failure rate, no professionals required.
Waterproof board, anti-corrosive, moisture and dust resistantcan be used in field operations such as tunnels, high-rise buildings
Stepless welding current regulator, Displays the welding time, parameters and input voltage. Convenient and practical.
Fan-dormant, energy-saving and reduces dust. 3 times better life.
Voltage compensation occurs during lower voltage, where the device automatically stabilises the welding parameters, when ultra-low voltage occurs the welding equipment can still be normal as its forces are much higher than ordinary welding machine. The special characteristics apply to: Power shortage and when the equipment is used in multiple construction projects at the same time
Welding controls are available in manual and automatic at conversion, to adapt to a variety of welding technology.
Welding parameters have been set up in panels in a comprehensive, real-feel equipment.
A reasonable output voltage design, the use of welding torch cable can be extended. Sustained high load, high anti-fatigue.
High-strength steel plate electrostatic spraying. The chassis is strong and corrosion resistant.
Dedicated to: steel, for floor boards, bridges, embedded parts, heavy machinery, industrial plants, high-rise buildings, power plant construction, chemical building, shipbuilding, metal structure, mechanical and electrical equipment.
≥ 3mm thickness of more than welding φ10mm, φ13mm, φ16mm, φ19mm, φ22mm, φ24mm peg , M4mm-M36mm stud, screws and nails similar to that bolt. Welding materials: carbon steel, low-alloy steel, stainless steel, copper and so on have to arc welding of materials. In the surface oxide layer, the film, primer or plating to deal with the welding work on the facilities. After the welding deformation is not no marks convex, flat welding, welding, welding Yang, the all-welding.
Technical Specifications
|
MODEL |
DA-1000i |
DA-1200i |
DA-1600i |
||||||
Stud range |
Φ4mm-Φ12mm | Φ4mm—Φ16mm | Φ4mm—Φ20mm | ||||||
Welding current |
200A-1000A | 200A—1200A | 200A—1600A | ||||||
Welding time |
0.1S-3.0S | 0.1S—3.0S | 0.1S—3.0S | ||||||
Welding speed |
Φ12 10pcs/min | Φ16 10pcs/min | Φ20 10pcs/min | ||||||
Input power |
|
|
|
||||||
Input capacity |
35KW | 40KW | 50KW | ||||||
Power switch |
63A | 63A | 100A | ||||||
Protection grade |
IP21 | IP21 | IP21 | ||||||
Cooling Method |
Fan | Fan | Fan | ||||||
Size（L x W x H） |
880mm×460mm×588mm | 880mm×460mm×588mm | 880mm×460mm×588mm | ||||||
Weight |
80+49kg | 90+49kg | 98+49kg |
MODEL |
DA-2000i |
DA-2500i |
DA-3150i |
||||||
Stud range |
Φ4mm—Φ24mm | Φ4mm—Φ28mm | Φ4mm—Φ36mm | ||||||
Welding current |
300A—2000A | 300A—2500A | 400A—3150A | ||||||
Welding time |
0.1S—3.0S | 0.1S—3.0S | 0.1S—3.0S | ||||||
Welding speed |
Φ24 10pcs/min | Φ28 10pcs/min | Φ36 8pcs/min | ||||||
Input power |
|
|
|
||||||
Input capacity |
60KW | 80KW | 110KW | ||||||
Power switch |
125A | 160A | 225A | ||||||
Protection grade |
IP21 |
IP21 | IP21 | ||||||
Cooling Mehod |
Fan | Fan | Fan | ||||||
Size（L, W, H） |
880mm×460mm×800mm | 880mm×460mm×800mm | 880mm×460mm×980mm | ||||||
Weight |
120+49kg | 135+49kg | 168+49kg |